Snmp Trap Port Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To view the following window, click Management > SNMP Settings > SNMP Community Masking Settings, as
shown below:
The fields that can be configured are described below:
Parameter
View Name
Access right
Enter a case-sensitive
community
Enter the community
again for confirmation
Click the Apply button to accept the changes made.

SNMP Trap Port Settings

This window is used to configure the SNMP trap port settings.
To view the following window, click Management > SNMP Settings > SNMP Trap Port Settings, as shown below:
Figure 4-48 SNMP Community Masking Settings window
Description
Use the drop-down menu to choose the MIB view name.
Use the drop-down menu to select the access right for the user using the
community string. Available options are Read Only and Read Write.
Enter a case-sensitive community string.
Retype the community string for confirmation.
88