D-Link xStack DGS-3620 Series Reference Manual page 566

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Jabber
SymbolErr
BuffFullDr
ACLDr
MulticastDr
VLANIngDr
InvalidIPv6
STPDr
StoFDBDis
MTUDr
Show/Hide
Click the Apply button to accept the changes made for each individual section.
Click the Clear button to clear all statistics counters on this window.
Click the View Table link to display the information in a table rather than a line graph.
Click the View Graphic
Transmitted (TX)
To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also
use the real-time graphic of the Switch or Switch stack at the top of the web page by simply clicking on a port.
To view this window, click Monitoring > Statistics > Port Statistics > Errors > Transmitted (TX) as shown below:
to 63 bytes in length and contains an invalid FCS or Alignment Errors. Includes integral
and non-integral lengths. These are normally the result of collisions.
Receive Jabber Frame Counter - Incremented for frames received, which exceeds
cntMaxSize bytes (cntMaxSize + 4 if tagged VLAN) to MAXFRAME size and contains
an invalid FCS or code error detected. This does not look at Range Length errors.
Receive Code Error Counter - incremented each time a valid carrier was presented and
at least one invalid data symbol was detected.
Buffer Full Drop - Incremented for each packet that is discarded while the input buffer is
full.
ACL Drop - Incremented for each packet that is denied by ACLs.
Multicast Drop - Incremented for each multicast packet that is discarded.
VLAN Ingress Drop - Incremented for each packet that is discarded by VLAN ingress
checking.
Invalid IPv6 - Increment counter for IPv6 Layer 3 discards.
STP Drop - Increment counter for packets dropped when the ingress port is not in the
forwarding state.
Storm and FDB Discard - Increment counter for received policy discards.
MTU Drop - Receive MTU Check Error Frame Counter. Incremented for frames
received, which exceeds the MAXFR (Maximum Frame) in length and contains a valid
or invalid FCS.
Check whether or not to display errors.
link to display the information in a line graph rather than a table.
565