D-Link xStack DGS-3620 Series Reference Manual page 612

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Voice VLAN
Event description: When a new voice device is detected in the port.
Log Message: New voice device detected (Port <portNum>, MAC <macaddr>)
Parameters description:
portNum : The port number.
macaddr: Voice device MAC address
Event description: When a port which is in auto Voice VLAN mode joins the Voice VLAN
Log Message: Port < portNum > add into Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
Event description: When a port leaves the Voice VLAN and at the same time, no voice device
is detected in the aging interval for that port, the log message will be sent.
Log Message: Port < portNum > remove from Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
DULD Event description: A unidirectional link has been detected on this port
Log Message: [DULD(1):] port:<[unitID:]
portNum> is unidirectional.
Parameters description:
unitID: the unit ID
portNum: port number
BGP Event description: BGP FSM with Peer has gone to the successfully established state.
Log Message: [BGP(1):] BGP connection is successfully established (Peer:<ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP connection is normally closed.
Log Message:[BGP(2):] BGP connection is normally closed(Peer:<ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP connection is closed due to error (Error Code, Error Subcode and
Data fields Refer to RFC).
Log Message: [BGP(3):] BGP connection is closed due to error (Code:<num>
Subcode:<num> Field:<field> Peer:<ipaddr>).
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
field: field value when an error happen.
ipaddr: IP address of the BGP peer.
Event description: Receive a BGP notify packet with an undefined error code or sub error
code in RFC 4271.
Log Message: [BGP(4):] BGP Notify: unkown Error code(num), Sub Error code(num),
Peer:<ipaddr>.
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Event description: Receive a BGP update packet but the next_hop points to a local interface.
Log Message: [BGP(5):] BGP Update Attr NHop: Erroneous NHop <ipaddr> Peer:<ipaddr>.
Parameters description:
ipaddr: IP address of BGP peer.
Event description: BGP connection is closed due to some events happens. (Event refer to
RFC)
Log Message: [BGP(6):] BGP connection is closed due to Event: <num> (Peer:<ipaddr>).
Parameters description:
num: Event is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Event description: BGP connection is closed due to receive notify packet. (Error Code and
Error Subcode refer to RFC)
Log Message: [BGP(7):] BGP connection is closed due to Notify: Code <num> Subcode
<num> (Peer:<ipaddr>).
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr: IP address of BGP peer.
Event description: The number of bgp prefix received from this neighbor reaches the
threshold.
Log Message: [BGP(8):] The number of prefix received reaches <num>, max <limit> (Peer <
611
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Warning
Warning
Warning
Warning
Information