D-Link xStack DGS-3620 Series Reference Manual page 333

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Access List Name
Type
Click the first Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the second Find button to display all the existing entries of the specified type.
Click the Delete button to remove all the entries of the specified type.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
After creating an IPv4 entry, click the
Figure 6-186 IP Standard Access List Settings - View Detail (IPv4) window
The fields that can be configured are described below:
Parameter
Direction
Access Address
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Delete button to remove the specific entry.
After creating an IPv6 entry, click the
Figure 6-185 IP Standard Access List Settings window
Description
Enter the name of the access list.
Select the IP standard access list type that will be created or displayed here. Options to
choose from are IPv4 and IPv6.
View Detail
Description
Use the drop-down menu to Permit or Deny the specified network.
Enter the IPv4 network address followed by the netmask.
View Detail
link to see the following window.
link to see the following window.
332