Adding An Ipv6 Egress Acl Profile - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Show All Rules button to navigate back to the Access Rule List.

Adding an IPv6 Egress ACL Profile

The window shown below is the Add Egress ACL Profile window for IPv6. To use specific filtering masks in this
egress ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add Egress ACL button, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-4)
Profile Name
Figure 8-58 Egress Access Rule Detail Information (IPv4 ACL) window
Figure 8-59 Add Egress ACL Profile window (IPv6 ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to
4.
Enter a profile name for the profile created.
410