D-Link xStack DGS-3620 Series Reference Manual page 62

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
IP MTU (512-16383)
IP Directed Broadcast
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
DHCP Option 12 State
DHCP Option 12 Host
Name
Click the Apply button to accept the changes made for each individual section.
Click the <<Back button to discard the changes made and return to the previous page.
Enter the IP Layer MTU value used. The value is between 512 and 16383. The
default value is 1500. Note: This value is for hardware forwarding only.
Use the drop-down menu to enable or disable the IP directed-broadcast state of the
interface.
Use the drop-down menu to specify the method that this Interface uses to acquire an
IP address.
Enter the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Select to enable or disable the DHCP Option 12 option here.
Enter the DHCP Option 12 host name used here.This name can be up to 63
characters long.
61