D-Link xStack DGS-3620 Series Reference Manual page 221

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Interface Admin State
Tunnel Mode
IPv6 Address/Prefix
Length
Source IP Address
Destination IP
Address
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made for each individual section.
Figure 6-23 IP Tunnel Settings window
Description
Enter the IP tunnel interface name.
Figure 6-24 IP tunnel Settings - Edit window
Description
Use the drop-down menu to enable or disable the interface admin state.
Use the drop-down menu to select the tunnel modes. Available selections are
Manual, 6to4, and ISATAP.
Enter the IPv6 network address.
Enter the source IP address.
Enter the destination IP address.
220