D-Link xStack DGS-3620 Series Reference Manual page 325

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
After selecting the Route Map option as the Type, the following options will be available.
The dynamic fields that can be configured are described below:
Parameter
Route Map Name
Click the Find button to locate a specific entry based on the information entered.
After selecting the Prefix List option as the Type, the following options will be available.
The dynamic fields that can be configured are described below:
Parameter
Prefix List Name
Click the Find button to locate a specific entry based on the information entered.
After selecting the CIDR Only option as the Type, the following options will be available.
Figure 6-171 BGP Routing Table (Route Map) window
Description
Enter the filter list name that was previously created by route map. This is used to display
routes matching the route map.
Figure 6-172 BGP Routing Table (Prefix List) window
Description
Enter the filter list name that was previously created by IP prefix list. This is used to
display routes conforming to the prefix list.
324