Bgp Clear Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Peer Established
Trap State
Peer Idle Trap State
Click the Apply button to accept the changes made for each individual section.

BGP Clear Settings

This window is used to reset the Border Gateway Protocol (BGP) connections using hard or soft reconfigurations.
To view the following window, click L3 Features > BGP > BGP Clear Settings, as shown below:
The fields that can be configured are described below:
Parameter
Type
Neighbor Address
AS Number
(1-4294967295)
Peer Group Name
Address Family
Description
Enable or disable the sending of the peer established trap. The default value is
Disabled.
Enable or disable the sending of the peer idle trap. The default value is Disabled.
Figure 6-167 BGP Clear Settings window
Description
Use the drop-down menu to select Neighbor Address, AS, Peer Group, External, or All.
Neighbor Address - Specify to reset the session with the specified neighbor.
AS - Specify to reset sessions with BGP peers in the specified Autonomous System.
Peer Group - Specify to reset a peer group.
External - Specify all eBGP sessions will be reset.
All - Specify that all current BGP sessions will be reset.
If Neighbor Address is selected in the Type drop-down menu, select a neighbor
address from the drop-down menu.
If AS is selected in the Type drop-down menu, enter an Autonomous System number.
If Peer Group is selected in the Type drop-down menu, select a peer group name from
the drop-down menu.
Select the address family that will be cleared here. Options to choose from are IPv4
Unicast and IPv6 Unicast.
321