D-Link xStack DGS-3620 Series Reference Manual page 342

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
BFD State Select to enable or disable the BFD feature here.
Interface Name Enter the interface's name that will be displayed here.
MinTxInt (ms) After clicking the Edit button, the following parameter will be available. Enter the minimum
transmit interval value here. This value must be between 50 and 1000 milliseconds.
MinRxInt (ms) After clicking the Edit button, the following parameter will be available. Enter the minimum
receive interval value here. This value must be between 50 and 1000 milliseconds.
Multiplier After clicking the Edit button, the following parameter will be available. Enter the BFD
detection time multiplier value here. This value must be between 3 and 99.
Slow Time (ms) After clicking the Edit button, the following parameter will be available. Enter the BFD slow
time value here. This value must be between 1000 and 3000 milliseconds.
Click the Apply button to accept the changes made.
Click the Find button to display the entry based on the information entered.
Click the View All button to display all the available entries.
Click the Edit button to re-configure the specified entry.
Figure 6-195 BFD Settings window
341