Wac Authentication State; Wac Customize Page - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
State
Idle Time (1-1440)
Block Time (0-300)
Click the Apply button to accept the changes made.

WAC Authentication State

Users can view and delete the hosts for Web authentication.
To view this window, click Security > Web-based Access Control (WAC) > WAC Authentication State as
shown below:
The fields that can be configured are described below:
Parameter
Port List
Authenticated
Authenticating
Blocked
Click the Find button to locate a specific entry based on the information entered.
Click the Clear by Port button to remove entry based on the port list entered.
Click the View All Hosts button to display all the existing entries.
Click the Clear All Hosts button to remove all the entries listed.

WAC Customize Page

This window is used to customize the authenticate page elements.
To view this window, click Security > Web-based Access Control (WAC) > WAC Customize Page as shown
check box to indicate the authenticated host will never age out on the port. The default
value is 1440 minutes (24 hours).
Use this drop-down menu to enable the configured ports as WAC ports.
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between 1 and 1440 minutes. Tick the Infinite
check box to indicate the Idle state of the authenticated host on the port will never be
checked. The default value is Infinite.
This parameter is the period of time a host will be blocked if it fails to pass
authentication. Enter a value between 0 and 300 seconds. The default value is 60
seconds.
Figure 9-41 WAC Authentication State window
Description
Enter a port or range of ports, and tick the appropriate check box(s), Authenticated,
Authenticating, and Blocked.
Tick this check box to clear all authenticated users for a port.
Tick this check box to clear all authenticating users for a port.
Tick this check box to clear all blocked users for a port.
453