D-Link xStack DGS-3620 Series Reference Manual page 310

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Neighbor Address
Peer Group Name
Action
String
Click the Apply button to accept the changes made.
BGP Neighbor Session Settings
This window is used to configure BGP neighbor session settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Session Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Neighbor Address
Peer Group Name
State
Activity
Address Family
Click the Apply button to accept the changes made.
BGP Neighbor Maximum Prefix Settings
This window is used to configure BGP neighbor maximum prefix settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Maximum Prefix
Settings, as shown below:
Select an existing BGP speaking neighbor address here.
Click the radio button and use the drop-down menu to select a name of the BGP peer
group.
Use the dorp-down menu to select Password or Clear Password. Password associates
a password with a neighbor. By default, the password is not specified. Clear Password
removes the neighbor's password.
Associate a password with a neighbor. By default, the password is not specified.
Figure 6-151 BGP Neighbor Session Settings window
Description
Click the radio button and use the drop-down menu to select the address of the BGP
speaking neighbor.
Click the radio button and use the drop-down menu to select the name of the BGP
peer group.
Click the radio button and use the drop-down menu to enable or disable the state. If
the state is changed from Enabled to Disabled, the session with the neighbor peer will
be terminated.
Click the radio button and use the drop-down menu to enable or disable the state for
an individual address family.
Select the unicast address family that will be configured here. Options to choose from
are IPv4 Unicast and IPv6 Unicast.
309