D-Link xStack DGS-3620 Series Reference Manual page 630

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
swERPSRPLOwnerConflictTrap
MSTP newRoot
topologyChange
CFM dot1agCfmFaultAlarm
CFM Extension swCFMExtAISOccurred
swCFMExtAISCleared
swCFMExtLockOccurred
swCFMExtLockCleared
Port Trap linkUp
linkDown
DDM swDdmAlarmTrap
swDdmWarningTrap
RPL owner conflicted on the ring.
The newRoot trap indicates that the sending
agent has become the new root of the Spanning
Tree; the trap is sent by a bridge soon after its
election as the new root, e.g., upon expiration of
the Topology Change Timer, immediately
subsequent to its election. Implementation of
this trap is optional.
A topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. Implementation of
is optional
This trap is initiated when a connectivity defect
is detected.
Binding objects:
(1) dot1agCfmMepHighestPrDefect
A notification is generated when local MEP
enters AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP exits
AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
enters lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP exits
lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when port linkup.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
A notification is generated when port linkdown.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
The trap is sent when any parameter value
exceeds the alarm threshold value or recovers
to normal status depending on the configuration
of the trap action.
Binding objects:
(1) swDdmPort
(2) swDdmThresholdType
(3) swDdmThresholdExceedType
(4) swDdmThresholdExceedOrRecover
The trap is sent when any parameter value
exceeds the warning threshold value or
recovers to normal status depending on the
configuration of the trap action.
Binding objects:
(1) swDdmPort
(2) swDdmThresholdType
(3) swDdmThresholdExceedType
(4) swDdmThresholdExceedOrRecover
629
1.3.6.1.4.1.171.12.78.4.0.3
1.3.6.1.2.1.17.0.1
1.3.6.1.2.1.17.0.2
this trap
1.3.111.2.802.1.1.8.0.1
1.3.6.1.4.1.171.12.86.100.
0.1
1.3.6.1.4.1.171.12.86.100.
0.2
1.3.6.1.4.1.171.12.86.100.
0.3
1.3.6.1.4.1.171.12.86.100.
0.4
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.171.12.72.4.0.1
1.3.6.1.4.1.171.12.72.4.0.2