D-Link xStack DGS-3620 Series Reference Manual page 162

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
IPv6 Address
Click the Find button to locate a specific entry based on the information entered.
Click the Create button to add a static group.
Click the Delete button to delete a static group.
Click the View All button to display all the existing entries.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear:
The fields that can be configured are described below:
Parameter
Unit
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Figure 5-81 MLD Snooping Static Group Settings window
Description
The name of the VLAN on which the static group resides.
The ID of the VLAN on which the static group resides.
Specify the multicast group IPv6 address.
Figure 5-82 MLD Snooping Static Group Settings – Edit window
Description
Select the unit you want to configure.
161