Sntp Settings; Time Zone Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

SNTP Settings

Users can configure the time settings for the Switch.
To view this window, click Network Application > SNTP > SNTP Settings as shown below:
The fields that can be configured are described below:
Parameter
SNTP State
Current Time
Time Source
IPv4 SNTP Primary
Server
IPv4 SNTP
Secondary Server
IPv6 SNTP Primary
Server
IPv6 SNTP
Secondary Server
SNTP Poll Interval In
Seconds (30-99999)
Click the Apply button to accept the changes made.

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings as shown below:
Figure 10-41 SNTP Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IPv4 address of the primary server from which the SNTP information will be taken.
The IPv4 address of the secondary server from which the SNTP information will be
taken.
The IPv6 address of the primary server from which the SNTP information will be taken.
The IPv6 address of the secondary server from which the SNTP information will be
taken.
The interval, in seconds, between requests for updated SNTP information.
529