D-Link xStack DGS-3620 Series Reference Manual page 113

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Modify button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Modify button, the following page will appear:
The fields that can be configured are described below:
Parameter Description
Action
Use the drop-down menu to add or delete the specified sub VLANs.
Sub VID List Enter the sub VLANs of the super VLAN.
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous page.
Sub VLAN Settings
This window is used to configure the sub VLANs of a super VLAN. A sub VLAN only can belong to one super
VLAN and users cannot bind an IP interface to it. The maximum number of sub VLANs for a super VLAN is 128.
To view the following window, click L2 Features > VLAN > Super VLAN > Sub VLAN Settings, as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the IP Range List
Click the IP Range List
Figure 5-20 Super VLAN Settings - Modify window
Figure 5-21 Sub VLAN Settings window
Description
Enter the name of the sub VLAN.
Enter the VLAN ID list of the sub VLAN.
link to configure the IP range for the specified sub VLAN.
link to see the following window.
112