Cfm Packet Counter - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
MD Index
MA Name
MA Index
MAC Address
TTL
PDU Priority
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.

CFM Packet Counter

This window is used to display the CFM packet counter information. This window does not count CCM packet
statistics of the MEPs in CFM hardware mode.
To view this window, click OAM > CFM > CFM Packet Counter, as shown below:
The fields that can be configured are described below:
Parameter
Select and enter the Maintenance Domain index used.
Select and enter the Maintenance Association name used.
Select and enter the Maintenance Association index used.
Here the user can enter the destination MAC address.
Link-trace message TTL value. The default value is 64.
The 802.1p priority to be set in the transmitted LTM. If not specified, it uses the same
priority as CCMs sent by the MA.
Figure 11-16 CFM Packet Counter window
Description
547