D-Link xStack DGS-3620 Series Reference Manual page 219

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Source Protocol
Type
Metric (0-16777214)
Route Map Name
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
When selecting BGP as the Destination Protocol, the following window will be displayed. (EI Mode Only)
The fields that can be configured are described below:
Parameter
Destination Protocol
Source Protocol
Type
Metric (0-
4294967295)
Route Map Name
are RIP, OSPF, and BGP (EI Mode Only).
Use the drop-down menu to select the source protocol. Options to choose from are
RIP, OSPF, BGP (EI Mode Only), Static, and Local.
When any option except OSPF is select as the Source Protocol, the following
parameters will be available for selection:
Type-1: Calculates the metric (for other routing protocols to OSPF) by adding the
destination's interface cost to the metric entered in the Metric field.
Type-2: Uses the metric entered in the Metric field without change. This field applies
only when the destination field is OSPF. If the metric type is not specified, it will be
type 2.
Enter the OSPF metric value for the redistributed routes.
Enter a route map which will be used as the criteria to determine whether to
redistribute specific routes.
Figure 6-21 Route Redistribution Settings (BGP)
Description
Use the drop-down menu to select the destination protocol.
Use the drop-down menu to select the source protocol.
When OSPF is select as the Source Protocol, the following parameters will be
available for selection:
All - To redistribute both OSPF AS-internal and OSPF AS-external routes to RIP or
BGP.
Internal - To redistribute only the OSPF AS-internal routes.
External - To redistribute only the OSPF AS-external routes, including Ext Type1 and
Ext Type2 routes.
Ext Type1 - To redistribute only the OSPF AS-external type-1 routes.
Ext Type2 - To redistribute only the OSPF AS-external type-2 routes.
Inter-E1 - To redistribute only the OSPF AS-external type-1 and OSPF AS-internal
routes.
Inter-E2 - To redistribute only the OSPF AS-external type-2 and OSPF AS-internal
routes.
Enter the BGP metric value for the redistributed routes.
Enter a route map which will be used as the criteria to determine whether to
218