D-Link xStack DGS-3620 Series Reference Manual page 574

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Mirror Global State
Group ID (1-4)
Click the Apply button to accept the changes made for each individual section.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Modify button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Modify button to see the following window.
The fields that can be configured are described below:
Parameter
Target Port
Source Ports
Source VLAN
Frame Type
Figure 12-18 Port Mirror Settings window
Description
Click the radio buttons to enable or disable the Port Mirroring feature.
Enter a mirror group ID.
Figure 12-19 Port Mirror Settings - Modify window
Description
Select the switch unit and port number that will receive the packets duplicated from
the mirrored ports here.
Enter the list of ports to be used as the source ports here.
Enter the list of VLAN IDs that will be used as the source ports here.
Select the mirrored direction here. Options to choose from are RX, TX, and Both.
Selecting RX specifies that only the received packets on the mirror group source
ports will be mirrored to the mirror group target port. Selecting TX specifies that only
the sent packets on the mirror group source ports will be mirrored to the mirror group
target port. Selecting Both specifies that both the received and sent packets on the
mirror group source ports will be mirrored to the mirror group target port.
573