D-Link xStack DGS-3620 Series Reference Manual page 53

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Time Interval Specifies that the reboot will start after this time interval has passed. Enter the time value
used here. This value must be between 1 and 43200 minutes.
Time Specifies that the reboot will take place on the specified time. Enter the time here. Enter
the two-digit hour (HH) value followed by a colon (:) and then enter the two-digit minute
(MM) value.
Date
Specifies that the reboot will take place on the specified date. If the date is not specified,
the reboot will take place at the next time specified. Enter the date here. The date format
is DD/MM/YYYY.
Save Before Tick this option to specify that the device will first save all configurations before initiating
Reboot the reboot.
Click the Apply button to accept the changes made.
Click the Delete button to remove all the configured reboot schedule settings.
52