D-Link xStack DGS-3620 Series Reference Manual page 610

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Port: <[unitID:]portNum>, MAC: <macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username: <username>, Port:
<[unitID:]portNum>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of the authenticated device.
RADIUS Event description: VID assigned from RADIUS server after RADIUS client is authenticated by
RADIUS server successfully .This VID will be assigned to the port and this port will be the
VLAN untagged port member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID> to port <[unitID:]portNum>
(account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Ingress bandwidth assigned from RADIUS server after RADIUS client is
authenticated by RADIUS server successfully .This Ingress bandwidth will be assigned to the
port.
Log Message: RADIUS server <ipaddr> assigned ingress bandwith :<ingressBandwidth> to
port <[unitID:]portNum> (account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Egress bandwidth assigned from RADIUS server after RADIUS client is
authenticated by RADIUS server successfully .This egress bandwidth will be assigned to the
port.
Log Message: RADIUS server <ipaddr> assigned egress bandwith :<egressBandwidth> to
port <[unitID:]portNum> (account: <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: 802.1p default priority assigned from RADIUS server after RADIUS client
is authenticated by RADIUS server successfully. This 802.1p default priority will be assigned
to the port.
Log Message: RADIUS server <ipaddr> assigned 802.1p default priority:<priority> to port
<[unitID:]portNum> (account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
priority: Priority of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Failed to assign ACL profiles/rules from RADIUS server.
Log Message: RADIUS server <ipaddr> assigns <username> ACL failure at port
<[unitID]portNum> (<string>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
string: The failed RADIUS ACL command string.
LLDP-MED Event description: LLDP-MED topology change detected
Log Message: LLDP-MED topology change detected (on port <portNum>. chassis id:
<chassisType>, <chassisID>, port id: <portType>, <portID>, device class: <deviceClass>)
609
Informational
Informational
Informational
Informational
Informational
Warning
Notice