Command Syntax - D-Link xstack DGS-3612G Instruction Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this manual.
The online help contained in the CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
Encloses a variable or value that must be specified.
create ipif <ipif_name 12> <network_address> (<ip_addr/netmask>)
<vlan_name 32> {secondary | state [enable | disable]}
In the above syntax example, users must supply an IP interface name in the
<ipif_name> space, a VLAN name in the <vlan_name 32> space, and the
network address,
(<ip_addr/netmask>) space. Do not type the angle brackets.
create ipif Engineering 10.24.22.5/255.0.0.0 Design
Encloses a required value or set of required arguments. One value or argument
can be specified.
create account [admin | user] <username 15>
In the above syntax example, users must specify either an admin or a user
level account to be created. Do not type the square brackets.
create account admin Darren
Separates two or more mutually exclusive items in a list, one of which must be
entered.
create account [admin | user] <username 15>
In the above syntax example, users must specify either admin, or user. Do not
type the backslash.
create account admin Darren
including the netmask,
7
C
OMMAND
in the <network_address>
3
S
YNTAX