D-Link xstack DGS-3612G Instruction Manual page 47

Example usage:
To configure the Switch location for "HQ 5F":
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "DGS-3612G Switch
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-3612G:4#
Used to configure the name for the Switch.
config snmp system_name <sw_name>
The config snmp system_name command configures the name of
the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
DGS-3612G:4#config snmp system_name DGS-3612G Switch
Command: config snmp system_name DGS-3612G Switch
Success.
DGS-3612G:4#
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#enable rmon
Command: enable rmon
Success.
DGS-3612G:4#
":
44