D-Link xstack DGS-3612G Instruction Manual page 51

DGS-3612G:4# download firmware_fromTFTP 10.53.13.201 c:/3612Gfirm.had c:/firm1
Command: download firmware_fromTFTP 10.53.13.201 c:/3612Gfirm.had c:/firm1
Connecting to server................................Done.
Download firmware..................................Done. Do not power off!
Upload file to FLASH................................Done.
DGS-3612G:4#
upload
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload a configuration file to the TFTP server.
DGS-3612G:4# upload cfg_toTFTP 10.53.13.3 c:/3612g.cfg
Command: upload cfg_toTFTP 10.53.13.3 c:/3612g.cfg
Connecting to server................................Done.
Upload configuration................................Done.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to upload a configuration file or log file to a TFTP server or to the internal
FLASH memory.
upload [cfg_toTFTP <ipaddr> <path_filename 64> {<path_filename 64>} |
log_toTFTP <ipaddr> <path_filename 64> {<path_filename 64>}]
This command is used to upload a configuration file or log file to a TFTP server
or to the internal FLASH memory. The user now has the option of saving the log
or configuration file on the FLASH memory located in the Switch using the
previously allocated c:/ drive.
cfg_toTFTP − Used to upload the current Switch configuration file to a TFTP
server, or to upload a configuration file saved in the Switch's FLASH memory to
a TFTP server.
• <ipaddr> − The IP address of the TFTP server.
• <path_filename 64> − The DOS path and filename of the configuration
file to be uploaded on the TFTP server. For example, C:\3612G.cfg.
•
{<path_filename 64>} – The second path_filename in the command
refers to the FLASH memory located on the Switch. This drive is
nominated c: and those who wish to save this file to a TFTP server
must enter the path and file name of the configuration file located on
the FLASH memory of the Switch using this parameter.
log_toTFTP − Used to upload a log file on the Switch to a TFTP server, or to
upload a log file saved in the Switch's FLASH memory to a TFTP server.
• <ipaddr> − The IP address of the TFTP server.
• <path_filename 64> − The DOS path and filename of the log file to be
uploaded on the TFTP server. For example, C:\3612G.txt.
•
{<path_filename 64>} – The second path_filename in the command
refers to the FLASH memory located on the Switch. This drive is
nominated c: and those who wish to save this file to a TFTP server
must enter the path and file name of the configuration file located on
the FLASH memory of the Switch using this parameter.
The TFTP server must be on the same IP subnet as the Switch. Only
administrator-level users can issue this command.
48