D-Link xstack DGS-3612G Instruction Manual page 13

Example usage:
To create an administrator-level user account with the username "dlink".
config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
show account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the accounts that have been created:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3612G:4#
Used to configure user accounts.
config account <username>
The config account command configures a user account that has
been created using the create account command.
<username>- Enter a name between 1 and 15 alphanumeric
characters to define the administrator account to configure here.
Only Administrator-level users can issue this command.
DGS-3612G:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3612G:4#
Used to display user accounts
show account
Displays all user accounts created on the Switch. Up to 8 user
accounts can exist at one time.
None.
Only Administrator-level users can issue this command.
10