D-Link xstack DGS-3612G Instruction Manual page 216

clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To remove dynamic entries in the ARP table:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from
the Switch's ARP table. Static ARP table entries are not affected.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#clear arptable
Command: clear arptable
Success.
DGS-3612G:4#
213