D-Link xstack DGS-3612G Instruction Manual page 19

Example usage:
To enable HTTP and configure port number:
DGS-3612G:4#enable web 80
Command: enable web 80
Success.
DGS-3612G:4#
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DGS-3612G:4#disable web
Command: disable web
Success.
DGS-3612G:4#
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to disable the HTTP-based management software on the Switch.
disable web
This command disables the Web-based management software on the
Switch.
None.
Only administrator-level users can issue this command.
Used to save changes in the Switch's configuration to non-volatile RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into the
Switch's memory each time the Switch is restarted.
None
Only administrator-level users can issue this command.
DGS-3612G:4#save
Command: save
Saving all configurations to NV-RAM... Done.
DGS-3612G:4#
16