D-Link xstack DGS-3612G Instruction Manual page 92

config multicast filtering_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the multicast filtering mode to filter unregistered groups on all VLANs.
DGS-3612G:4#config multicast filtering_mode all filter_unregistered_groups
Command: config multicast filtering_mode all filter_unregistered_groups
Success.
DGS-3612G:4#
show multicast filtering_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the multicast filtering mode for all VLANs:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to configure the multicast packet filtering mode for specific VLANs .
config multicast filtering_mode [<vlan_name 32> | all]
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups]
This command will configure the multicast packet filtering mode for specified
VLANs on the Switch.
<vlan_name 32> - Specifies a VLAN by VLAN name to set. If no VLAN is
defined here, the rule is applied to all VLANs
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups] – The user may set the filtering mode to any of
these three options.
Only administrator-level users can issue this command.
Used to show the multicast packet filtering mode as configured for
the VLANs.
show multicast filtering_mode {vlan <vlan_name 32>}
This command will display the current multicast packet filtering
mode for specified VLANs or all VLANs on the Switch.
vlan <vlan_name 32> - Specifies a VLAN to display multicast
filtering status.
None.
DGS-3612G:4#show multicast filtering_mode
Command: show multicast filtering_mode
VLAN Name
--------------------------------
default
v1
v2
v3
DGS-3612G:4#
Multicast Filter Mode
-----------------------------
filter_unregistered_groups
filter_unregistered_groups
filter_unregistered_groups
filter_unregistered_groups
89