D-Link xstack DGS-3612G Instruction Manual page 296

config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:
show authen parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the authentication parameters currently set on the Switch:
DGS-3612G:4#show authen parameter
Command: show authen parameter
Response timeout : 60 seconds
User attempts
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to configure the maximum number of times the Switch will accept
authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the Switch
will accept authentication attempts. Users failing to be authenticated
after the set amount of attempts will be denied access to the Switch
and will be locked out of further authentication attempts. Command line
interface users will have to wait 60 seconds before another
authentication attempt. Telnet users will be disconnected from the
Switch.
parameter attempt <int 1-255> - Set the maximum number of attempts
the user may try to become authenticated by the Switch, before being
locked out. The default setting is 3 attempts.
Only administrator-level users can issue this command.
DGS-3612G:4# config authen parameter attempt 5
Command: config authen parameter attempt 5
Success.
DGS-3612G:4#
Used to display the authentication parameters currently configured
on the Switch.
show authen parameter
This command will display the authentication parameters currently
configured on the Switch, including the response timeout and user
authentication attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to
wait for a response of authentication from the user attempting to log
in from the command line interface or telnet interface.
User attempts - The maximum number of attempts the user may try
to become authenticated by the Switch, before being locked out.
The default number of attempts for authentication is 3.
None.
None.
: 5
293