D-Link xstack DGS-3612G Instruction Manual page 286

config authen_enable
Restrictions
Example usage:
To configure the user defined method list "Permit" with authentication methods TACACS, XTACACS and local, in that
order.
DGS-3612G:4#config authen_enable method_list_name Trinity method tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
DGS-3612G:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DGS-3612G:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DGS-3612G:4#
delete authen_enable method_list_name
Purpose
Syntax
Description
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
defined by the user (create authen_enable). The user may add one, or a
combination of up to four (4) of the following authentication methods to
this method list:
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote
TACACS+ server.
radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote
RADIUS server.
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
local_enable - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch. The local enable password of the device can be
configured using the "config admin local_password"
command.
none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
Only administrator-level users can issue this command.
Used to delete a user-defined method list of authentication methods for
promoting normal user level privileges to Administrator level privileges
on the Switch.
delete authen_enable method_list_name <string 15>
This command is used to delete a user-defined method list of
th ti ti th d f ti
283
l l i il t