D-Link xstack DGS-3612G Instruction Manual page 227

create iproute ipv6
Restrictions
Example usage:
To add a single static IPv6 entry in IPv6 format:
delete iproute ipv6
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a static IPv6 entry from the routing table:
show iproute ipv6
Purpose
Syntax
Description
Parameters
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
format as ipv6address / prefix_length (ipv6address is hexadecimal number,
prefix length is decimal number, for example 1234::5D7F/32).
<ipv6addr> − IPv6 address for the next hop router.
<metric 1-65535> − Allows the entry of a routing protocol metric entry,
representing the number of routers between the Switch and the IP address
above. The default setting is 1.
Only administrator-level users can issue this command.
DGS-3612G:4#create iproute 1234::5D7F/32 2D30::AC21
Command:create iproute 1234::5D7F/32 2D30::AC21
Success.
DGS-3612G:4#
Used to delete an static IPv6 route entry from the Switch's IP routing table.
delete iproute ipv6 {<ipv6networkaddr> <ipv6addr> | all}
This command will delete an existing static IPv6 entry from the Switch's IP
routing table.
<ipv6networkaddr> − IPV6 address and netmask of the IP interface that is
the destination of the route. Specify the address and mask information using
the format as ipv6address / prefix_length (ipv6address is hexadecimal
number, prefix length is decimal number, for example 1234::5D7F/32).
<ipv6addr> − IPv6 address for the next hop router.
all − This will delete all IPv6 static entries for the destination and next hop.
Only administrator-level users can issue this command.
DGS-3612G:4# delete iproute 1234::5D7F/32 2D30::AC21
Command: delete iproute 1234::5D7F/32 2D30::AC21
Success.
DGS-3612G:4#
Used to display the Switch's current static IPv6 routing table or a
specified IPv6 address.
show iproute ipv6 {<ipv6networkaddr>}
This command will display the Switch's current static IPv6 routing table
or a specific IPv6 entry.
<ipv6networkaddr> − IPV6 address and netmask of the IP interface that
is the destination of the route. Specify the address and mask
information using the format as ipv6address / prefix_length
224