D-Link xstack DGS-3612G Instruction Manual page 294

config authen server_group
Restrictions
Example usage:
To add an authentication host to server group "group_1":
delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
show authen server_group
Purpose
Syntax
Description
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
server group.
server_host <ipaddr> - Enter the IP address of the previously configured server
host to add or delete.
protocol – Enter the protocol utilized by the server host. There are three
options:
tacacs – Use this parameter to define the protocol if the server host is
using the TACACS authentication protocol.
xtacacs – Use this parameter to define the protocol if the server host
is using the XTACACS authentication protocol.
tacacs+ – Use this parameter to define the protocol if the server host
is using the TACACS+ authentication protocol.
radius – Use this parameter to define the protocol if the server host is
using the RADIUS authentication protocol.
Only administrator-level users can issue this command.
DGS-3612G:4# config authen server_group group_1 add
server_host 10.1.1.121 protocol tacacs+
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Success.
DGS-3612G:4#
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command will delete an authentication server group.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be deleted.
Only administrator-level users can issue this command.
DGS-3612G:4#delete server_group group_1
Command: delete server_group group_1
Success.
DGS-3612G:4#
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
fi d th S it h
291