D-Link xstack DGS-3612G Instruction Manual page 211

show traffic_segmentation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current traffic segmentation configuration on the Switch.
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current traffic segmentation configuration on the
Switch.
show traffic_segmentation {<portlist>}
The show traffic_segmentation command is used to display the
current traffic segmentation configuration on the Switch.
<portlist> − Specifies a port or range of ports for which the current
traffic segmentation configuration on the Switch will be displayed.
The port lists for segmentation and the forward list must be on the
same Switch.
DGS-3612G:4#show traffic_segmentation
Command: show traffic_segmentation
Traffic Segmentation Table
Port Forward Portlist
------ --------------------------------------------------
1 1-12
2 1-12
3 1-12
4 1-12
5 1-12
6 1-12
7 1-12
8 1-12
9 1-12
10 1-12
11 1-12
12 1-12
DGS-3612G:4#
208