D-Link xstack DGS-3612G Instruction Manual page 176

create 802.1x user
Restrictions
Example Usage:
To create an 802.1x user:
show 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
DGS-3612G:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username
--------------
Darren
Total entries: 1
DGS-3612G:4#
delete 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
length.
Only administrator-level users can issue this command.
DGS-3612G:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3612G:4#
Used to display the 802.1x user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
None.
None.
Password
--------------
Trinity
Used to delete an 802.1x user account on the Switch.
delete 802.1x user <username 15>
The delete 802.1x user command is used to delete the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
<username 15> − A username can be as many as 15 alphanumeric
characters.
Only administrator-level users can issue this command.
173