D-Link xstack DGS-3612G Instruction Manual page 240

To change the RIP receive mode for the IP interface System:
DGS-3612G:4#config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
Success.
DGS-3612G:4#
enable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RIP:
disable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable RIP:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable RIP.
enable rip
This command is used to enable RIP on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#enable rip
Command: enable rip
Success.
DGS-3612G:4#
Used to disable RIP.
disable rip
This command is used to disable RIP on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#disable rip
Command: disable rip
Success.
DGS-3612G:4#
237