D-Link xstack DGS-3612G Instruction Manual page 237

disable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable status of DNS relay.
DGS-3612G:4#disable dnsr
Command: disable dnsr
Success.
DGS-3612G:4#
Example usage:
To disable cache lookup for DNS relay.
DGS-3612G:4#disable dnsr cache
Command: disable dnsr cache
Success.
DGS-3612G:4#
Example usage:
To disable static table lookup for DNS relay.
DGS-3612G:4#disable dnsr static
Command: disable dnsr static
Success.
DGS-3612G:4#
show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DNS relay status:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to disable DNS relay on the Switch.
disable dnsr {[cache | static]}
This command is used, in combination with the enable dnsr command
above, to enable and disable DNS Relay on the Switch.
cache – This parameter will allow the user to disable the cache lookup
for the DNS relay on the Switch.
static – This parameter will allow the user to disable the static table
lookup for the DNS relay on the Switch.
Only administrator-level users can issue this command.
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current DNS relay status.
static − Allows the display of only the static entries into the DNS relay
table. If this parameter is omitted, the entire DNS relay table will be
displayed.
None.
234