D-Link xstack DGS-3612G Instruction Manual page 244

show dvmrp routing_table
Parameters
Restrictions
Example usage:
To display DVMRP routing table:
DGS-3612G:4#show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor Metric Learned
---------------
10.0.0.0/8
20.0.0.0/8
30.0.0.0/8
Total Entries: 3
DGS-3612G:4#
show dvmrp neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DVMRP neighbor table:
DGS-3612G:4#show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface
---------------
System
Total Entries: 1
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
ipaddress <network_address> − The IP address and netmask of the
destination. The address and mask information can be specified using
the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
10.1.2.3/8).
None.
---------------
10.90.90.90
20.1.1.1
30.1.1.1
Used to display the DVMRP neighbor table.
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress
<network_address>}
This command will display the current DVMRP neighbor table.
<ipif_name 12> − The name of the IP interface for which to display the
DVMRP neighbor table.
ipaddress <network_address> − The IP address and netmask of the
destination. The address and mask information can be specified using
the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
10.1.2.3/8).
None.
Neighbor Address Generation ID
-----------------------
10.2.1.123
---- -------
2 Local
2 Local
2 Dynamic
Expire Time
------------------- ---------
2 35
241
Interface Expire
------------ ------
System -
ip2 117
ip3 106