D-Link xstack DGS-3612G Instruction Manual page 115

show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DGS-3612G:4#show vlan
Command: show vlan
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
Total Entries : 2
DGS-3612G:4#
show gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port status:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current VLAN configuration on the Switch.
show vlan {<vlan_name 32>}
This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is a
member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to display
a summary of settings.
None.
: 1
: 1QVLAN
:
:
: 1-9
: 1-9
: 1-9
: 2
: PROTOCOL
:
:
: 10-12
: 10-12
:
Used to display the GVRP status for a port list on the Switch.
show gvrp {<portlist>}
This command displays the GVRP status for a port list on the Switch.
<portlist> − Specifies a range of ports for which the GVRP status is to
be displayed.
None.
VLAN Name : default
Protocol ID :
Advertisement : Enabled
VLAN Name : v1
Protocol ID : ip
Advertisement : Enabled
112