D-Link xstack DGS-3612G Instruction Manual page 56

dir
Restrictions
Example usage:
To view the directory files on the internal FLASH drive:
DGS-3612G:4#dir c:
Command: dir c:
Current Directory: C:\
File name
------------------
ABC
LOG.TXT
STARTUP.CFG
RUN.HAD
----------------------------------------------------------------------------------------------
Total files
Total free size
System reserved flash size
'*' means boot up section
DGS-3612G:4#
show system boot_file
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To rename a file:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Only administrator-level users can issue this command.
Size(byte)
-----------------------
2678500 bytes
520124 bytes
(*)
(*) 2678500 bytes
Used to show the currently set boot files located on the Switch.
show system boot_file
This command is used to display the name and path of the firmware
image and configuration file that have been previously set up by the
user, as the boot up files.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#show system boot_file
Command: show system boot_file
Boot up image: C:/RUN.HAD
Boot up Configuration file: C:/STARTUP.CFG
DGS-3612G:4#
11007 bytes
4 files
9293625 bytes
2097152 bytes
53
Update time
-----------------------
2006/06/20 18:57
2006/07/27 16:56
2006/07/27 16:24
2006/07/27 16:25