D-Link xstack DGS-3612G Instruction Manual page 264

show ospf lsdb
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the link state database of OSPF:
DGS-3612G:4#show ospf lsdb
Command: show ospf lsdb
Area
ID
-----------
0.0.0.0
0.0.0.0
1.0.0.0
1.0.0.0
1.0.0.0
*
Total Entries: 5
DGS-3612G:4#
show ospf neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage example
To display the current OSPF neighbor router table:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the OSPF Link State Database (LSDB).
show ospf lsdb {area_id <area_id> | advertise_router <ipaddr> | type
[rtrlink | netlink | summary | assummary | asextlink | nssa_ext]}
This command will display the current OSPF Link State Database (LSDB).
area_id <area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
advertise_router <ipaddr> − The router ID of the advertising router.
type [rtrlink | netlink | summary | assummary | asextlink | nssa_ext] − The
type of link.
None.
NOTE: When this command displays a "
the area_id or the Cost, this is interpreted as "no area ID" for external LSAs, and as
"no cost given" for the advertised link.
LSDB Advertising
Type Router ID
-------------- ------------------ ------------------ -------
RTRLink 50.48.75.73
Summary 50.48.75.73
RTRLink 50.48.75.73
Summary 50.48.75.73
Summary 50.48.75.73
ASExtLink 50.48.75.73
Used to display the current OSPF neighbor router table.
show ospf neighbor {<ipaddr>}
This command will display the current OSPF neighbor router table.
<ipaddr> − The IP address of the neighbor router.
None.
*
" (a star symbol) in the OSPF LSDB table for
Link State Cost
ID
50.48.75.73 *
10.0.0.0/8 1
50.48.75.73 *
40.0.0.0/8 1
50.0.0.0/8 1
1.2.0.0/16 20
261
Sequence
Number
-----------------
0x80000002
0x80000001
0x80000001
0x80000001
0x80000001
0x80000001