D-Link xstack DGS-3612G Instruction Manual page 135

Example usage:
To delete the IP interface named s2:
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings.
DGS-3612G:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
Secondary
IP Address
Subnet Mask
VLAN Name
Admin. State
Link Status
Member Ports
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#delete ipif s2
Command: delete ipif s2
Success.
DGS-3612G:4#
Used to display the configuration of an IP interface on the Switch.
show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on the Switch.
<ipif_name 12> − The name created for the IP interface to be viewed.
None.
: FALSE
: 10.48.74.122
: 255.0.0.0
: default
: Enabled
: Link UP
: 1-26
NOTE: In the IP Interface Settings table shown above, the Secondary field
will have two displays. FALSE denotes that the IP interface is a primary IP
interface while TRUE denotes a secondary IP interface.
(MANUAL)
132