D-Link xstack DGS-3612G Instruction Manual page 189

DGS-3612G:4#config access_profile profile_id 4 add access_id 1 ipv6
class 1 flowlabel 0xABCD port 4 deny
Command: config access_profile profile_id 4 add access_id 1 ipv6
class 1 flowlabel 0xABCD port 4 deny
Success.
DGS-3612G:4#
delete access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the access profile with a profile ID of 1:
DGS-3612G:4#delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-3612G:4#
show access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the currently configured access profiles on the Switch:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete a previously created access profile.
delete access_profile profile_id <value 1-14>
The delete access_profile command is used to delete a previously
created access profile on the Switch.
profile_id <value 1-14> − Enter an integer between 1 and 14 that is
used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Only administrator-level users can issue this command.
Used to display the currently configured access profiles on the Switch.
show access_profile {profile_id <value 1-14>}
The show access_profile command is used to display the currently configured
access profiles.
profile_id <value 1-14> − Enter an integer between 1 and 14 that is used to
identify the access profile that will be viewed with this command. This value is
assigned to the access profile when it is created with the create access_profile
command.
Entering this command without the profile_id parameter will command the
Switch to display all access profile entries.
Only administrator-level users can issue this command.
186