D-Link xstack DGS-3612G Instruction Manual page 112

Example usage:
To create a VLAN v1, tag 2:
DGS-3612G:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DGS-3612G:4#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN "v1":
config vlan add
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add 4 through 8 of module 2 as tagged ports to the VLAN v1:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only administrator-level users can issue this command.
DGS-3612G:4#delete vlan v1
Command: delete vlan v1
Success.
DGS-3612G:4#
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[add [ tagged | untagged |
forbidden] <portlist> | advertisement [enable | disable]}
This command is used to add ports to the port list of a previously
configured VLAN. Additional ports may be specified as tagging,
untagging, or forbidden. The default is to assign the ports as
untagging.
<vlan_name 32> − The name of the VLAN to add or delete ports to.
add − Specifies which ports to add. The user may also specify if the
ports are:
• tagged − Specifies the additional ports as tagged.
• untagged − Specifies the additional ports as untagged.
• forbidden − Specifies the additional ports as forbidden.
<portlist> − A port or range of ports to add to the VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the
specified VLAN.
Only administrator-level users can issue this command.
109