D-Link xstack DGS-3612G Instruction Manual page 225

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xstack DGS-3612G:
Table of Contents

Advertisement

create iproute default
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table:
delete iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the routing
table:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to create IP route entries to the Switch's IP routing table.
create iproute default <ipaddr> {<metric>}
This command is used to create a default static IP route entry to the
Switch's IP routing table.
<ipaddr> − The gateway IP address for the next hop router.
<metric> − Allows the entry of a routing protocol metric entry representing
the number of routers between the Switch and the IP address above. The
default setting is 1.
Only administrator-level users can issue this command.
DGS-3612G:4#create iproute default 10.48.74.121 1
Command: create iproute default 10.48.74.121 1
Success.
DGS-3612G:4#
Used to delete an IP route entry from the Switch's IP routing table.
delete iproute <network_address> <ipaddr> [primary | backup]
This command will delete an existing entry from the Switch's IP routing
table.
<network_address> − IP address and netmask of the IP interface that is
the destination of the route. The address and mask information can be
specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in
CIDR format, 10.1.2.3/8).
<ipaddr> − The gateway IP address for the next hop router.
[primary | backup] − The user may choose between Primary and Backup.
If the Primary Static/Default Route fails, the Backup Route will support the
entry. Please take note that the Primary and Backup entries cannot have
the same Gateway.
Only administrator-level users can issue this command.
DGS-3612G:4#delete iproute 10.48.74.121/8 10.1.1.254
Command: delete iproute 10.48.74.121/8 10.1.1.254
Success.
DGS-3612G:4#
222

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents