D-Link xstack DGS-3612G Instruction Manual page 60

Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
DGS-3612G:4#download configuration 10.41.44.44 c:\cfg\setting.txt
Command: download configuration 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DGS-3612G:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3612G:4#
DGS-3612G:4##-------------------------------------------------------------------
DGS-3612G:4##
DGS-3612G:4#
**********
* Logout *
**********
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To stop the autoconfiguration function:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00-B62
End of configuration file for DGS-3612G
Use this to deactivate autoconfiguration from DHCP.
disable autoconfig
This instructs the Switch not to accept autoconfiguration instruction from the
DHCP server. This does not change the IP settings of the Switch. The ipif
settings will continue as DHCP client until changed with the config ipif
command.
None.
None.
57