D-Link xstack DGS-3612G Instruction Manual page 116

DGS-3612G:4#show gvrp
Command: show gvrp
Global GVRP : Disabled
Port
------
1
2
3
4
5
6
7
8
9
10
11
12
Total Entries : 12
DGS-3612G:4#
create 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a previously created VLAN as a 802.1x Guest VLAN for the Switch.
DGS-3612G:4#create 802.1x guest_vlan Trinity
Command: create 802.1x guest_vlan Trinity
Success.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
PVID GVRP
---- --------
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Disabled
Used to configure a pre-existing VLAN as a 802.1x Guest VLAN.
create 802.1x guest_vlan <vlan_name 32>
The create 802.1x guest_vlan command is used to configure a pre-
defined VLAN as a 802.1x Guest VLAN. Guest 802.1X VLAN clients
are those who have not been authorized for 802.1x or they haven't
yet installed the necessary 802.1x software, yet would still like
limited access rights on the Switch.
<vlan_name 32> - Enter an alphanumeric string of no more than 32
characters to define a pre-existing VLAN as an 802.1x Guest VLAN.
This VLAN must have first been created with the create vlan
command mentioned earlier in this manual.
Only administrator-level users can issue this command. This VLAN
is only supported for port-based 802.1x and must have already been
previously created using the create vlan command. Only one VLAN
can be set as the 802.1x Guest VLAN.
Ingress Checking Acceptable Frame Type
---------------- ---------------------------
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
Enabled All Frames
113