D-Link xstack DGS-3612G Instruction Manual page 66

enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
show syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current status of the syslog function:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to
a remote host.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#enable syslog
Command: enable syslog
Success.
DGS-3612G:4#
Used to enable the system log to be sent to a remote host.
disable syslog
The disable syslog command enables the system log to be sent to a
remote host.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#disable syslog
Command: disable syslog
Success.
DGS-3612G:4#
Used to display the syslog protocol status as enabled or disabled.
show syslog
The show syslog command displays the syslog status as enabled or
disabled.
None.
None.
63