D-Link xstack DGS-3612G Instruction Manual page 118

delete 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an 802.1X Guest VLAN:
DGS-3612G:4#delete 802.1x guest_vlan Triton
Command: delete 802.1x guest_vlan Triton
Success.
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete an 802.1x Guest VLAN.
delete 802.1x guest_vlan
The delete 802.1x guest_vlan command is used to delete a VLAN that has
been enabled as an 802.1x Guest VLAN. Guest 802.1X VLAN clients are
those who have not been authorized for 802.1x or they haven't yet installed
the necessary 802.1x software, yet would still like limited access rights on
the Switch.
None.
Only administrator-level users can issue this command. This VLAN is only
supported for port-based 802.1x and must have already been previously
created using the create vlan command. Only one VLAN can be set as the
802.1x Guest VLAN.
115