D-Link xstack DGS-3612G Instruction Manual page 162

delete limited multicast address
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the limited multicast address on ports 1-3:
show limited multicast address
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the limited multicast address on ports 1-3:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete Limited IP multicast address range.
delete limited multicast address [all | <portlist>]
The delete limited multicast address command allows the user to
delete all multicast address ranges or a selected range based on
what port or ports the range has been assigned to.
all - Allows the user to delete all limited multicast addresses that
have been configured on the Switch.
<portlist> - Allows the user to delete only those multicast address
ranges that have been assigned to a particular port or range of ports.
Only administrator-level users can issue this command.
DGS-3612G:4#delete limited multicast address 1-3
Command: delete limited multicast address 1-3
Success.
DGS-3612G:4#
Used to show per-port limited IP multicast address range.
show limited multicast address {<portlist>}
The show limited multicast address command allows users to
show multicast address range by ports.
<portlist> A port or range of ports on which the limited multicast
address range to be shown has been assigned.
None.
DGS-3612G:4#show limited multicast address 1-3
Command: show limited multicast address 1-3
Port From To
---- -------------- --------------- --------
1 224.1.1.1 224.1.1.2
2 224.1.1.1 224.1.1.2
3 224.1.1.1 224.1.1.2
DGS-3612G:4#
Access Status
-------
permit enable
permit enable
permit enable
159