D-Link xstack DGS-3612G Instruction Manual page 73

To configure the system severity settings for critical traps only:
DGS-3612G:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3612G:4#
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show system severity information:
DGS-3612G:4#show system_severity
Command: show system_severity
system_severity log : information
system_severity trap : information
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the log and trap information regarding the system
severity on the Switch.
show system_severity
The show system_severity command is used to display the
system severity information in use on the Switch.
None.
None.
70